Pipeline flowmeter
Flange ultrasonic flowmeter HD-TUF420G
- Accuracy: ≤ 0.5%
- Velocity range: 0-10m/s, measured in both forward and reverse directions
- Pipeline diameter: DN50-DN6000mm
- Sensor type: pipe segment type
- Product description: A segmented ultrasonic flow meter is an instrument that measures the liquid flow rate inside a circular tube based on the principle of time difference method. It adopts advanced multi pulse technology
-
Product Introduction
A segmented ultrasonic flow meter is an instrument that measures the liquid flow rate inside a circular tube based on the principle of time difference method. It adopts advanced multi pulse technology, signal digital processing technology, and error correction technology, making the flow meter more adaptable to the industrial environment, and measuring more convenient, economical, and accurate. The product has reached advanced levels both domestically and internationally, and can be widely used in fields such as petroleum, chemical, metallurgy, power, water supply and drainage.
The segmented ultrasonic flowmeter produced by Chongqing Haydun Technology Co., Ltd. consists of a main engine and segmented sensors. DN15-DN32 adopts π type pipe segment sensors, while DN40 and above use standard pipe segment sensors. The segmental ultrasonic flowmeter has the advantages of simple installation, low initial flow rate, high measurement accuracy, and no pressure loss.
Functional characteristics
※ It needs to be cut and installed, but it has excellent stability and will not affect the measurement results due to changes in the external environment.
※ Ultrasonic flow meters can provide very low flow measurement for process control.
※ High precision measurement, with a maximum measurement accuracy of 0.5%.
※ The protection level of the sensor can reach IP68.
※ Wide measurement range, capable of measuring pipes with a diameter of DN50-DN6000.
※ Multiple installation methods for the host: wall mounted, rail mounted, etc.
※ Equipped with 3 signal input interfaces, it can expand the access of other sensors.
※ The cost of use is low, and compared to other types of flow meters, ultrasonic flow meters ※ have a higher cost-effectiveness.
Technical parameter
Specification and model: HD-TUF420G
Measurement accuracy: ≤ 0.5%
Flow rate range: 0-10m/s, measured in both forward and reverse directions
Pipeline diameter: DN50-DN6000mm
Sensor type: pipe segment type
Fluid temperature: -30-160 ℃
Fluid types: water, seawater, sewage, various oils, single and uniform liquids that can conduct ultrasonic waves
Pipeline materials: Steel, cast iron, copper, PVC, aluminum, fiberglass, etc., with lining allowed
Signal output: 4-20mA
Signal input: 3 channels 4-20mA
Communication interface: isolated RS485 serial interface, supporting MODBUS protocol
Power supply method: DC8-36V
Protection level: host IP65, sensor IP68
Working temperature: host -20-60 ℃, sensor -30-160 ℃
Working humidity: ≤ 80% RH
∷
